Visul Flexstone Panels FAQs
-
How many tiles are there in a box? – 8 per box
-
What size are the tiles?– 2ft x 1ft
-
How much does a box of tiles weigh?– 26-31 lbs depending on tile
-
How much does an adhesive kit weigh? – 11 lbs.
-
How many tiles can be installed with 1 adhesive kit?– One adhesive kit will adhere one box of tiles on an average substrate.
-
What equipment is required to install Visul Flexstone Panels? - •Power drill and paddle mix – to mix adhesive
• Duck tape – to mark adhesive application area
• Chalk line – pathfinder installation or rail road platform projects
• Notched trowel – to apply the adhesive to the substrate
• Small angle grinder with wire cup brush – surface preparation
• Latex gloves – to protect hands
• Paint thinner and shop rags - for cleaning up
• Roller wheel – to remove trapped air -
In what conditions can the tiles be laid? – The temperature must be above 36°F. Temperature and radiant heat from the sun will affect cure times, the warmer the conditions, the faster the cure. If fitting tiles below 50°F ‘Visul Quik-Set’ adhesive is required.
-
How long does the adhesive take to cure?– cure times vary dependant on temperature, Quik-set takes 30 minutes to 1 hour between 50 and 75°F respectively.
-
Does Visul's truncated dome tile meet ADA requirements? - Yes. Visul Corporation's Flex Stone Panels have been manufactured to function as the best truncated dome detectable warning surface available while meeting ADA / ADAAG requirements.
